| Material: | 6063 Extruded 6063 High Strength Aluminum |
|---|---|
| Structure: | Collimating Optical Sight |
| Type: | Red Ddot Sight |
| Model Number: | Es-Rd-Svd-1X |
| Surface Treatment: | Black Hard Anodized |
| Reticle Illumination Color: | Green |
| Samples: |
Sample comes with standard custom package
|
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The tactical Close Combat 1x23 SVD Red Dot Sight with Tritium Power Illuminating Green Reticle Weapon Scope
Model:ES-RD-SVD-1X
Normal dot or unitque Chevron reticle are available.
Specifications and Feature:
Tactical 1X Green Dot Reticle Sight Weapon Scope
1. 1X magnification
2. Chevron reticle available
3. Full Metal with polish finish
4. More than 8 year constant Tritium power supply
Detailed description and introduction of this unique sight design:
Feature 1/2″ M.O.A (100 Yards) windage and elevation with for greater precision
Install on 21mm picatinny and weaver rail
Warranty Service: Within 13 months including shipping after production
It is recommended to have the red dot sight mounted by a professional gunsmith. However, if attempting to mount the sight without professional assistance please read and strictly adhere to the following directions.
BORESIGHTING THE RED/GREEN RETICLE OR DOT SIGHT
Boresighting and test firing should be performed safely on a firing range. Laser boresights are a quick and accurate method to sighting in scopes .Listed below is the traditional method of boresighting.
1. When mounting the sight on a bolt action weapon, remove the bolt; or when mounting to a semi automatic gun, disassemble the weapon until there is a straight line of sight through the bore.
2. Use a target at least 20yds to 50yds away when sighting in. Look through the bore of the weapon and locate the bullseye of the target.
3. Sight in the target through the bore and then make windage and elevation adjustments to the sight until the reticle is centered.
To verify the scope is sighted in, fire a three-shot test group.
4. If you are still off center, make the necessary adjustments and again fire a three-shot test group.
OPERATING THE WINDAGE AND ELEVATION ADJUSTMENTS
To make windage and elevation adjustments:
1. Remove the both caps covering the windage and elevation adjustments.
2. Using a flathead screwdriver or coin make the necessary adjustments. The windage and elevation adjustments are ±40M.O.A meaning 1 click moves the point of impact 1/2 in. at 100 yds. Adjustments can be both felt and heard.
3. Once adjustments are complete, screw the caps back on.
MAINTENANCE
Proper maintenance of the red dot sight is recommended to ensure longevity. It is recommended that when the dot sight becomes dirty, it is wiped down with a dry or slightly damp cloth. Blow dirt and debris off all optics and then clean lenses with a lens cleaning cloth. No further maintenance is required.
WARNING
Always follow your firearm's instruction manual and warnings. Follow safe firearm practice. WARNING! Never attempt to mount the sight on a loaded firearm. DO NOT disassemble the sight for any reason as this will void the warranty and could be hazardous. Any internal work should be handled by the manufacturer. Any tampering with the purge screw will void the warranty.
TROUBLESHOOTING
Never ship back a red dot sight without getting the proper authorization beforehand. Doing so could result in losing the red dot sight due to a multitude of reasons, i.e. sending it to the wrong address and other problems associated with unexpected packages.
1. Check the firearms' mount that is securely attached. Also, verify the red dot is mounted securely to the weapon. If there is any shifting, retighten the mounting system according to the mounting instructions but do not over tighten.
2. When test firing a weapon to check the point of impact relative to windage and elevation adjustments, firing from a shooting rest will help eliminate shifting during firing.
3. Be sure to use factory-loaded ammunition of the same bullet type, weight, and preferably, lot number when sighting in the red dot sight.
Brief Introduction with main tech info of this sight:
|
Our Service
Except man-made mistakes, we will exchange the defective with a brand new one within 14 days after you get our product. According to the guild regulations customer shall be responsible for the returning shipping fee.
Warranty: 1 Year free warranty with up to 2-3 years limited warranty for this model designator.
Warranty, we offer 13 months limited warranty for our products including shipping after production finished. Damage due to misuse, ill treatment and unauthorized modifications and repairs are not covered by our warranty.
Shipping Method, We provide comprehensive shipping methods, for small quantity orders we ship by DHL Air-Express, or EMS/TNT Express service, it is safe and fast. For large quantity orders we can ship by Air transportation or sea transportation, also we can ship order to buyer's cargo agent in China. We quoted prices are EXW price, don't include shipping cost.
Company Policy: Strive for the Customer Satisfaction
We have rich experience upon the international order all over the world. We can deliver the order to your office or home directly. We will combine the shipping cost for multi items purchase.
FAQ
Finally, your feedback and suggestion are very important for us.
Thanks again for your attention. We sincerely hope you will enjoy our products.
All our products are built for real firearms. Our latest designators are manufactured with high quality components and materials. Excellent quality and stable performance. Water resistant, shock proof and recoil proof via (under) necessary condition testing.
Erains TAC Optics ML Grade Tactical More than 8 years Tritium Power Constant Illuminating Green Reticle or Red Dot Sight Weapon Reticle Scope for hunting, law enforcement or other related tactical applications.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}