| Material: | 6063 Extruded 6063 High Strength Aluminum |
|---|---|
| Structure: | Telescopic Sight |
| Type: | Red Dot Scope |
| Sort: | Red DOT Sight, Red DOT Scope, Reticle Scope |
| Color: | Matte Black |
| Surface Treatment: | Rugged Rosting Oxidized |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The IP66 Rated Waterproof Tactical Hunting Close Combat 2x42 Red / Green Dot Chevron Reticle Sight Weapon Scope
Normal dot or unitque Chevron reticle are available.
Model: ES-2X42D
Specifications
Tactical 2X42D Green and Red Dot Sight Rilfe Scope
1. 2X magnification
2. Chevron reticle available
3. Full Metal with polish finish
Click value (1 click=MOA) : 1
Windage & Elevation(MOA) : 60
Low power consumption for longer battery life
Shock proof (1000g) and Fog Proof
High quality aluminum alloy in durable black matte finish with Rosting Oxidized
Feature 1 M.O.A (100 Yards) windage and elevation with for greater precision
Install on 21mm picatinny and weaver rail
It is recommended to have the red dot sight mounted by a professional gunsmith. However, if attempting to mount the sight without professional assistance please read and strictly adhere to the following directions.
BORESIGHTING THE RED DOT SIGHT
Boresighting and test firing should be performed safely on a firing range. Laser boresights are a quick and accurate method to sighting in scopes .Listed below is the traditional method of boresighting.
1. When mounting the sight on a bolt action weapons, remove the bolt; or when mounting to a semi automatic gun, disassemble the gun until there is a straight line of sight through the bore.
2. Use a target at least 20yds to 50yds away when sighting in. Look through the bore of the weapon and locate the bullseye of the target.
3. Sight in the target through the bore and then make windage and elevation adjustments to the sight until the reticle is centered.
To verify the scope is sighted in, fire a three-shot test group.
4. If you are still off center, make the necessary adjustments and again fire a three-shot test group.
OPERATING THE WINDAGE AND ELEVATION ADJUSTMENTS
To make windage and elevation adjustments:
1. Remove the caps covering the windage and elevation adjustments.
2. Using a flathead screwdriver or coin make the necessary adjustments. The windage and elevation adjustments are 1 MOA, meaning 1 click moves the point of impact 1in. at 100 yds. Adjustments can be both felt and heard.
3. Once adjustments are complete, screw the caps back on.
MAINTENANCE
Proper maintenance of the red dot sight is recommended to ensure longevity. It is recommended that when the dot sight becomes dirty, it is wiped down with a dry or slightly damp cloth. Blow dirt and debris off all optics and then clean lenses with a lens cleaning cloth. No further maintenance is required.
WARNING
Always follow your firearm's instruction manual and warnings. Follow safe firearm practice. WARNING! Never attempt to mount the sight on a loaded firearm. DO NOT disassemble the sight for any reason as this will void the warranty and could be hazardous. Any internal work should be handled by the manufacturer. Any tampering with the purge screw will void the warranty.
TROUBLESHOOTING
Never ship back a red dot sight Weapon scope without getting the proper authorization beforehand. Doing so could result in losing the red dot sight due to a multitude of reasons, i.e. sending it to the wrong address and other problems associated with unexpected packages.
1. Check the firearms' mount that is securely attached. Also, verify the red dot is mounted securely to the gun. If there is any shifting, retighten the mounting system according to the mounting instructions but do not over tighten.
2. When test firing a weapon to check the point of impact relative to windage and elevation adjustments, firing from a shooting rest will help eliminate shifting during firing. 3. Be sure to use factory-loaded ammunition of the same bullet type, weight, and preferably, lot number when sighting in the red dot sight.
INSTALLING THE BATTERY
The Erains Tactical Close Combat 2x42 Red Dot Sight Weapon Scope is powered by one CR2032. Should the reticle grow dim or not illuminate, the battery needs to be replaced. To install a new battery:
1. Unscrew the battery cap (4) counter clockwise and remove the battery.
2. Insert new battery with the positive (+) side facing up.
3. Screw the battery cap clockwise. Do not overtighten.
OPERATING THE ON/OFF SWITCH
To activate the Red Dot Sight:
1. Locate the on/off switch (5) and Rotate the adjustment switch to the desired illumination setting.
2. After use, turn the switch to the off position marked by "0".
Brief Introduction with main tech info of this sight:
|
All our products are built for real firearms. Our latest designators are manufactured with high quality components and materials. Excellent quality and stable performance. Water resistant, shock proof and recoil proof via (under) necessary condition testing.
SUPPILIER R&D DEPARTMENT AND BOTH ERAINS WITH SUPPLIER DOUBLE QUALITY CONTROL GUARANTEE
Our Service
Except man-made mistakes, we will exchange the defective with a brand new one within 14 days after you get our product. According to the guild regulations customer shall be responsible for the returning shipping fee.
Warranty: 12 months free warranty with up to 5 years limited warranty for this model laser/light combos.
| Q1. Does package come with battery inside? A: No. Package will not include battery inside, expect for some built-in battery products. If you have to need the battery, please contact us before you placean order. |
| Q2. Will this item fit on my gun(s) /weapon? A: All the Erains TAC Optics laser products fit for a standard picatinny rail. Some small lasers only fit for subcompact weapons, and some only for long guns. If you can not make sure whether this item fits your weapon or not, welcome to contact us to help you. |
| Q3. How long is the delivery time? A: 7-10 Days for Sample Order / 25-35 Days for MOQ Order |
| Q4. What is the warranty policy? A: We can offer you 18 months warranty for defective products in unused condition on the premise of storing as required. |
| Q5. Are you a factory or a trading company? A: We are a 10 years professional trading company with a strong connection to a wide range of China top supplying factories who are with independent well-established RD & QC abilities, most of the supplying factories are the china top 10 manufactuers in the related area such as laser, light and scopes. |
| Q6. Do you provide OEM/ODM service? And packing with our logos? A: Yes, we can do OEM and ODM with your logo as your request. |
| Q7. Is green laser brighter than red? What is the difference between a red laser and a green laser? A: Yes. The green spectrum is the most sensitive to the human eye. To achieve the same laser output, and thus the same laser safety class, green light is perceived more easily by the eye than red light. |
| Q8. What is the MOQ? A: 100 pieces for most models. |
| Q9. What is your payment method? A: T/T, Western Union, Money Gram, PayPal |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}